Технология легкой промышленности
Журналы СПГУТД: Главная / Известия вузов. Технология легкой промышленности / Вестник СПГУТД / Дизайн. Материалы. Технология / Вестник Молодых ученых СПГУТД /

№ 3, 2014

Рус

ОБРАЗОВАТЕЛЬНЫЕ ТЕХНОЛОГИ

Т. Р. Мкртчян, О. О. Боглюкова
Удовлетворенность потребителя уровнем образовательных услуг как фактор конкурентоспособности вуза

Анализ составляющих элементов удовлетворенности клиентов  дает возможность разработать успешную стратегию развития вуза и повышения его конкурентоспособности. На примере  рассмотренного университета проведено исследование удовлетворенности его клиентов качеством образовательных услуг и перспектив, которые открываются перед выпускниками после окончания обучения. На основе полученных результатов могут быть построены рекомендации к улучшению деятельности данного образовательного учреждения  и повышению уровня удовлетворенности клиентов качеством образовательных услуг.
Ключевые слова: конкурентоспособность вуза, удовлетворенность клиентов, образовательная услуга, качество, образовательное учреждение.

Т. Р. Мкртчян, Е. Ю. Тараненко
Оценка качества образовательного сервиса  программ профессиональной переподготовки в вузах

В статье проведено исследование факторов образовательного сервиса, формирующих потребительскую ценность образовательных программ, разрабатываемых вузами. Разработана классификация показателей качества образовательного сервиса в рамках программ ПП, описывающая влияние показателей образовательного сервиса на эффективность предоставления образовательных услуг.  Определены требования по качеству образовательных программ на этапе их формирования, соблюдение которых обеспечат образовательному учреждению – разработчику высокую конкурентоспособность предлагаемых им  на рынке продуктов.
Ключевые слова: конкурентоспособность вуза,  оценка, образовательная программа, образовательный сервис, качество образовательного продукта, критерии качества.

ЭКОНОМИКА И ОРГАНИЗАЦИЯ ПРОИЗВОДСТВА

А.М. Колесников, Н.Л. Долотова
Методы определения и контроля затрат в маркетинговой деятельности предприятия

В статье проведен анализ существующих методов определения затрат на маркетинговую деятельность;  исследована структура расходов как составляющая бюджета маркетинга; выделены  возможные способы маркетингового контроля; сформулированы проблемы реализации контроллинга в сфере маркетинга на предприятии и даны рекомендации по их решению.
Ключевые слова:
Маркетинговая деятельность, Структура затрат, Бюджет маркетинга, Контроллинг маркетинга.

Е. Г. Касаткина
Недвижимое имущество как часть инфраструктурного комплекса легкой промышленности: сущность, основные определения, классификация

В статье рассмотрены юридические и экономические подходы к понятию «недвижимость», приведены основные классификации
Ключевые слова:
недвижимость, объекты недвижимости, основные фонды, легкая промышленность, инфраструктура

МАТЕРИАЛОВЕДЕНИЕ, ТОВАРОВЕДЕНИЕ И СЕРТИФИКАЦИЯ ПРОДУКЦИИ

В.Е. Беденко, М. Н. Иванов, А. Е. Рудин, И.В. Стефанская
Усовершенствование метода определения разрывной нагрузки при разрыве нитей и швейных ниток петлей

В предлагаемой работе представлены результаты исследований разрывной нагрузки нитей в петле, охватывающей поверхности опорных тел различного вида и геометрии в условиях неподвижного огибания опоры и в процессе перемещения.
Ключевые слова: разрывная нагрузка нити в петле, опорная поверхность, ведущая, ведомая ветви нити в петле

О.А.Гаранина, О.В. Романкевич, Ю.А. Ващенко
Смачивание волокнистых материалов с коническими капиллярами

В статье проведен анализ смачиваемости модельных гидрофобных волокнистых материалов с учетом конусности капилляров.
Ключевые слова:
капиллярность, смачивание, краевой угол смачивания, гидрофобные волокнистые материалы.

А.П. Михайловская, М.С.Калугина

Крашение хлопчатобумажных текстильных материалов активными красителями в присутствии четвертичных аммониевых солей

Разработаны рекомендации использования хлорида бензилдиметилгексадециламмония и бромида бензилдиметилдодециламмония при крашении хлопчатобумажных текстильных материалов активными красителями винилсульфонового и монохлортриазинового типов по различным технологиям.
Ключевые слова:
активный краситель, хлопковое волокно, четвертичная аммониевая соль, крашение


О. А. Труевцева, Б. М. Примаченко
Оценка качества синтетических моющих средств различных производителей

Исследованы эксплуатационные свойства четырёх марок синтетических моющих средств. Осуществлен сравнительный анализ полученных результатов. Построенные комплексные показатели качества позволяют определить наиболее эффективное средство.
Ключевые слова:
синтетическое моющее средство, показатель качества, моющая способность, различные загрязнения

ТЕХНИЧЕСКИЙ ТЕКСТИЛЬ И ВОЛОКНИСТЫЕ КОМПОЗИТЫ

Е.Л. Пашин, А.Г. Носов

Совершенствование технологии производства короткоштапельного льноволокна для производства биокомпозитов

Использование льноволокна взамен хлопка является перспективным направлением импортозамещения. Оно требует использования малозатратных технологий  получения  хлопкоподобного модифицированного льняного волокна (МЛВ) и достижения его свойств, необходимых для производства композитов. Предложено получение МЛВ на основе предварительного формирования из исходного льноволокна  ленты, её механического облагораживания с последующей модификацией волокон по длине и толщине с использованием высокоскоростного скользящего знакопеременного изгиба. Созданы машины-модификаторы, требующие применения системы управления на основе текущего контроля цвета волокна в ленте и её толщины.
Ключевые слова:
лён, лента, короткоштапельное волокно, биокомпозиты, машины- модификаторы

А. Г. Макаров, Г. Я. Слуцкер, Н.В.Дроботун, В. В. Васильева

Диаграммы растяжения ориентированных волокон полипропилена при вариации скорости  растяжения

Проведены измерения диаграмм растяжения ориентированных волокон полипропилена до их разрыва при различающихся в 10 3раз значениях скорости растяжения. При получении диаграмм растяжения учтено уменьшение диаметра волокон, что заметно влияет на форму диаграмм растяжения. Установлена линейность диаграмм при высокой скорости растяжения и характерная нелинейность – при низкой скорости. Поставлен вопрос количественного объяснения установленных закономерностей.
Ключевые слова:
скорость растяжения, деформация, упругость, линейность, нелинейность, релаксация, сила упругости, напряжение

А. С. Степашкина,  Е. С. Цобкалло,  А. Н. Алешин

Моделирование электропроводности композитных материалов, полученных на основе полипропилена и технического углерода

Получен композитный материал на основе полипропилена, в качестве наполнителя взят технический углерод. Экспериментально получена зависимость удельного электрического сопротивления от массовой доли наполнителя. Показано, что полученная зависимость имеет пороговый характер. Показано, что при концентрациях наполнителя ниже порога протекания материал сохраняет диэлектрические свойства.  При концентрациях выше порога протекания величины удельного сопротивления снижаются  более чем на 8-10 порядков. Предложен метод теоретического описания электропроводности полученного композиционного материала. Смоделирован процесс электропроводности материала для получения значений порога протекания с помощью метода Монте-Карло.
Ключевые слова:
композитный материал, полипропилен-технический углерод, удельное электрическое сопротивление, метод Монте-Карло.

Ю. М. Трещалин, А.Н. Боначев, М. Ю. Трещалин, М. В. Киселев

Полимерные композиты на основе нетканых материалов «Холлофайбер»

В статье рассматривается получение композитов с заданными свойствами предполагает выбор наиболее оптимальных структур волокнистой основы, который определяется параметрами готового изделия: формой, технологическими способами изготовления, физико-механическими и стоимостными показателями. Нетканые полотна, в силу высокой прочности и низкой себестоимости являются одним из наиболее экономически целесообразных видов армирующих каркасов для большой номенклатуры изделий из композиционных материалов
Ключевые слова: волокнистая основа, нетканые полотна, композиты

ПРОЕКТИРОВАНИЕ, ТЕХНОЛОГИЯ МАТЕРИАЛОВ ЛЕГКОЙ ПРОМЫШЛЕННОСТИ

Л.В. Лобова, В.И. Кобякова, И.А. Казиев
Исследование влияния аппретирования на сохранность шёлковых тканей

Исследованы три клеевых состава (аппрета), которые используются в реставрационных работах с тканями, с целью минимизвции изменения свойств и наилучшей сохранность музейных предметов из натурального шёлка (знамен, одежды, воинского снаряжения). Для этого проводили крашение, а затем исследовали цветовые характеристики, светостойкость, а также прочность, относительное удлинение и жесткость аппретированных образцов и образцов без аппрета до и после инсоляции.
Ключевые слова:
натуральный шёлк, реставрация, аппретирование, цветовые характеристики, цветовые различия, светостойкость, прочность, жёсткость

Ю. М. Трещалин, М. Ю. Трещалин, М. В. Киселев
Экспериментальное исследование адгезионных взаимосвязей связующего и структурных элементов нетканой основы.

В статье рассматривается взаимодействие между волокном и полимерным связующим во многом определяется адгезией, от которой зависит прочность композиционных материалов. В различных случаях адгезия обусловливается разными механизмами, в соответствие с которыми различаются следующие теории адгезии: электрическая, адсорбционная, диффузионная, механическая и слабого граничного слоя
Ключевые слова: адгезия,  нетканая основа,  композиционные материалы, мононить, полиамидная нить

Н. В. Берлова, Т.В. Чадова
Применение  растительных препаратов в качестве антисептика при отмоке пушного сырья

Обосновано применение водного экстракта околоплодника маньчжурского ореха, об-ладающего антимикробной активностью в отношении гнилостных микроорганизмов, в качестве антисептика при отмоке консервированного пушного сырья, что способ-ствует повышению его качества. 
Ключевые слова: околоплодник маньчжурского ореха, отмока, антисептик, антимик-робные свойства,  фунгицидная активность, пушное сырье.

ПРОЕКТИРОВАНИЕ, ТЕХНОЛОГИЯ ИЗДЕЛИЙ ЛЕГКОЙ ПРОМЫШЛЕННОСТИ

Л. И. – О. Адигезалов, А. В. Просвирницын

Перспективы развития  технологических процессов  с улучшенными экологическими характеристиками при изготовлении обуви

В работе рассмотрена общая методика выбора перспективных направлений,  улучшающих экологические характеристики технологических процессов при изготовлении обуви. Представлен пример использования безотходной технологии стельки из композиционного материала
Ключевые слова:
диаграмма Исикавы, безотходная технология стельки, композиционный материал

И.П.  Бердникова,  Б.С.  Кокорев,  К.А.Меликаев
Цифровой метод построения колодки обуви в ортопедии

Проведен анализ традиционных методов обмера стопы. Рассмотрена возможность использования 3D сканеров для обмера голеностопа. Дано описание цифрового метода построения колодки в современных CAD системах. Предлагаются пути усовершенствования данного метода на базе отечественных методик проектирования. Описаны дальнейшие пути использования результатов, цифрового метода построения колодок обуви.
Ключевые слова.
3D сканер, бесконтактный обмер, цифровой метод построения колодок.

А. Н. Коробкина, Л. И. – О. Адигезалов
Особенности получение плантограмм стопы для проектирования обуви для спортивных бальных танцев

В работе рассмотрена методика получения плантограмм бесконтактным фотографическим способом.  Полученные данные могут быть использованы при проектировании деталей низа обуви для танцев.
Ключевые слова:
плантограмма, бесконтактный метод, обувь для  спортивных бальных танцев

И.В. Клюева, Н.В. Савина, М.В. Бекк
Цвет и аппликация в ортопедической обуви как факторы психофизиологического развития детей

В статье рассмотрены особенности влияния цвета в обуви на психофизиологическое состояние детей, приводятся примеры аппликаций и рекомендации по их применению
Ключевые слова:
обувь, дети, аппликации, цветовые сочетания

ОБОРУДОВАНИЕ ОТРАСЛИ И АВТОМАТИЗАЦИЯ ПРОИЗВОДСТВА

Ю. Н. Нефедов, Б. С. Михайлов
Развитие теории процесса очистки волокнистого материала на машинах разрыхлительно-очистительного агрегата
Статья посвящена развитию и анализу математических моделей, описывающих процесс соровыделения на машинах РОА. Введено понятие интенсивности соровыделения, как комплексного показателя, зависящего от большого количества факторов влияния. Показан характер влияния наиболее значимых факторов на эффективность процесса соровыделения.
Ключевые слова: волокнистая масса, интенсивность соровыделения, степень разрыхлённости, эффективность очистки, сорные примеси, клочок.

Eng

EDUCATIONAL TECHNOLOGY

I.V. Andreeva , T.R. Mkrtchyan

Iinfluence of organizational culture on the level of satisfaction choice of university consumers of educational services

In modern conditions, with fierce competition in the education market , the solution stimulate consumer demand is becoming the main paradigm of strategic development of the educational institution. Among the most significant factors that provide an acceptable level of customer satisfaction services of an educational institution is its organizational culture . The article deals with theoretical and methodological approach to the study of the phenomenon of organizational culture. Investigates the influence of organizational culture typology to choose one or another of the university and the level of customer satisfaction of educational services.

Keywords : organizational culture , educational service , customer satisfaction , educational institution .

EQUIPMENT AND AUTOMATION INDUSTRY

J.I. Wulfson

Influence of nonstationary dynamic constraints on oscillations of needlepunch  machines drives

We investigate some dynamic effects occurring in the needle-table drive of needlepunch machine. Was established that nonstationarity of constraints is the source  of vibrations excitation and leads to undesirable redistribution of energy between subsystems and shape modes.  Conditions for elimination of dynamic instability and vibrations  reduce are presented.

Keywords: needlepunch  machine, vibrations, nonstationary constraint, energy.

S.B. Orenbah, V.A. Dubovickij

Basic parameters affecting on uniform carding carding machines

Investigations of the relationship between fluctuations and removal coefficient linear density fleece leaving batt obtained from material balance conditions. Number of fibers that have fallen from the main drum removable during dt.

Key words: evenness batt,  removal coefficient, linear density

MATERIALS SCIENCE, COMMODITY RESEARCH AND PRODUCTION CERTIFICATION

A.M. Bochek, N.M. Zabivalova, I.V.Gofman, I.V. Abalov

Properties of Aqueous Solutions of Methyl Cellulose- Arabinogalactan Blends and of the related Composite Films

The rheological properties of dilute and moderately concentrated aqueous solutions of methyl cellulose mixtures with arabinogalactan isolated from Siberian larch are studied. The conditions of gelation in solutions of polymer blends are investigated. Composite films were prepared from the solutions and their mechanical properties were investigated.

Key words: methylcellulose, arabinogalactan, aqueous solutions, film composite

M.A. Velboy, E.L.  Vladimirtseva, L.V. Sharnina, E.G. Shamsuddinova

The sorptive activity of clay minerals in relation to solutions of direct and reactive dyes

The sorption activity of clay minerals in relation to solutions of direct and reactive  dyes was compared . The possibility of purification of exhaust dyeing solutions by oxidative destruction was investigated.

Keywords: aluminum silicates, clay minerals, sorption, direct dyes, reactive dyes, hydrogen peroxide.

B.M.  Primachenko

Estimation of the industrial clothes quality

Present procedure of estimation of the industrial clothes quality with help complex indexes. Complex indexes were designed from control parameters of structure and characteristics of service properties of clothes. Estimation of the dried clothes for paper industry quality showed truth developed procedure.

Keywords: procedure, quality, complex indexes, industrial clothes

TECHNICAL TEXTILES AND FIBER COMPOSITES

A. G. Makarov, G. Ja. Slucker, N.V. Drobotun, O.B.Terushkina

Cumulative processes in the kinetics of creep and fracture of oriented polypropylene fibers.  Part 1.

On a large lot identical oriented polypropylene fibers, divided into a number of series , conducted studies of the kinetics of creep and fracture under constant tensile load in magnitude . Applied two loading mode : continuous load to failure,  and continuous action of the load and then re- loading to failure are determined . The values ​​of longevity, speed stationary creep, creep deformation with their distribution ( scatter ) . The distinction in kinetic characteristics of creeps and fracture modes for different sample loading is established

Keywords: polypropylene, kinetics, deformation, creep rate, longevity, distribution

A. G. Makarov, G. Ja. Slucker, N.V. Drobotun, O.B.Terushkina

Cumulative processes in the kinetics of creep and fracture of oriented polypropylene fibers.  Part 2

Experimental data on the kinetics of creep and failure for a series of identical samples oriented polypropylene fibers were loaded under identical conditions with variation of loading conditions . Average values ​​and dispersion parameters of the kinetic characteristics : durability, creep strain rate of the stationary creep. Based on a comparison of mean values ​​and dispersion characteristics of the parameters for different loading conditions established accumulation of elements of destruction ( breaks the chain molecules PP), which determines the degree of durability of the polymer. Accumulation of creep strain as a criterion to break the polymer is not

Keywords: polypropylene, kinetics, deformation, creep speed, destruction, longevity, distribution

INFORMATION TECHNOLOGIES AND MATHEMATICAL MODELING

A.G. Makarov, V.V. Maksimov, N.V. Pereborova, V.I. Wagner

Computer simulation of deformation processes of textile materials complex structure

On the basis of systems analysis of viscoelastic properties of textile materials with a complex structure developed analytical and computer methods to predict the deformation processes . Choosing the analytic version of the normalized relaxation function and creep function is based on a mathematical model of the optimality criterion viscoelasticity.
Keywords: textile materials with a complex structure, deformation processes, creep, mathematical model

N.V. Pereborova, V.I. Wagner, E.K. Vasilyeva, Y.D. Druzhkina, V.V. Maksimov

Feedback process relaxation polymer textile materials and their numerical forecasting

It is shown that when predicting complex relaxation processes of polymeric textile materials, in particular, the inverse relaxation processes apply universal techniques developed for nonlinear processes hereditary relaxation, and forecasting on these methods gives results quite close to the experimental data. As seen normalized relaxation function of the logarithm of the arc tangent given time.

Key words: relaxation processes, reverse relaxation, polymeric materials, nonlinear hereditary relaxation

ECOLOGY AND BIOTECHNOLOGIES

R.F. Vitkovskaja, Je.N. Chulkova, I.V. Kochurov

Research of regularities of the reagent coagulating of disperse systems of sewage of paint and varnish production

The main regularities of reagent treatment of wastewater generated from water-based paint production at pH~7 using coagulant “Aqua-Aurat-30” with dosage up to 500 mg/l (in terms of Al2O3) and flocculant “Praestol-650 TR” with dosage up to 20 mg/l with the subsequent phase separation by a centrifugation has been investigated. It was shown that the use of coagulant “Aqua-Aurat-30” with dosage 400 mg/l  (in terms of Al2O3) with subsequent separation by a centrifugation at 2500 rpm within 15 minutes in the range of pH from 6,5 to 7,0 leads to considerable decrease of turbidity (from 445000 NTU to 35 NTU), COD (from 40000 mg/l to 15500 mg/l), TSS (from 27,3 to 0,3 mg/l) and also content of residual aluminum (up to 10 mg/l) in clarified water. The separated sludge had humidity 81% and content of aluminum 15,4%. The treated wastewater could be used for cleaning operations of units such as reactors and etc.

Keywords: Industrial wastewater, Coagulation, Floculation, water-based paint.

S. A. Chekrenyov,  T. I. Markova V. P. Panov

Chemical states of heavy metals present in sludge of surface water bodies

The article represents results of investigation on chemical forms of heavy metals present in sludge of surface water bodies as well as mobility and quantitative distribution between organic fractions of sludge surface water bodies.

Key words: river sludge, heavy metals, fractional distribution, mobility of metals.

DESIGN, TECHNOLOGY OF LIGHT INDUSTRY MATERIALS

O.M. Ivanov, N.A. Babina, S.Y.Ivanova

The process of forming fleece cover in technology electroflocking

In the work new approach to constructing models of process of forming fleece cover at electroflocking is offered. The model is based on the concept of orientation of pile on the material surface at the initial deposition pile. It is possible to obtain the dependence of the surface density fleece cover from time of application.

Keywords: flocking, pile, the orientation of pile, the density fleece cover

N.D. Prudnikova, N.V. Pervaya, K.L. Shevchenko

Study materials natural origin and their  possible use in preventive articles

The article provides information on preventive insoles used in antieydzhingovoy medicine to slow age-specific biological processes, disease prevention and treatment. The results of the study of natural materials - namely, seed fruit plants, studied the possibility of their use as a filler in acupressure products.

Keywords: antieydzhing, reflexology, acupuncture points, preventive medical products, preventive insole.

A. V. Kulichenko

Airpermeability of deformed knitting fabrics

Thanks to the loop structure knitting fabrics have a high elongation and can be easy deformed even at low stress. Because of that in use their structure and properties, particularly an airpermeability, may change. That means the information of a fabric airpermeability at the initial/non-deformed state can not characterize its “behavior” in  ready-made clothes when wear. A device for the multi-axes deformation of knitting fabrics has been developed. Data of different knitting fabrics airpermeability dependence on their deformation obtained with the device and a standard Airpermeameter are presented together with results of regression and correlation analyses of the data and a mathematical model of the “deformation-airpermeability” dependence.

Key words: knitting fabrics, deformation, airpermeability

O.M. Ivanov, N.A.Babina

Influence of orientation pile on the dynamics of growth of the surface density the pile  fabrics cover in technology electroflocking

In the work the ratio for calculation of density pile cover from the time of application of pile based on its orientation on the surface of material instead of using the value of marginal density pile cover is offered. The technique of an assessment of the quantitative characteristic of orientation of pile is stated. The experimental data for an assessment of the influence conductivity of pile and its charge on the parameter characterizing its orientation on a material are presented.

Keywords: flocking, pile, the electrical conductivity, the charge pile, the marginal density pile cover

DESIGN, TECHNOLOGY PRODUCTS OF LIGHT INDUSTRY

V.A. Bezrodin

To the problem of unification army uniforms: 1874 - 1913

Mass army needed in more clothing and equipment, which leads to unification, simplification of military clothing. Transition to military service in 1874, the need to have a military reserve, caused changes in the construction of an army uniform. Trying to shape the final unification of the army in 1913 was not implemented in practice due to the outbreak of war.

Key words: clothing, gear, army uniforms, unification, military reform, cap, coat, trousers, overcoat, protective clothing, tunic

ECONOMICS AND ORGANIZATION

A. I. Bogdanov, F. V.  Ilyin, L. N. Nikitina

Decision making mathematical models of real investment governance

The mathematical models of real investment performance evaluation with a random character of expected income and determinate rate of discount, and also with a probabilistic nature of expected income and inflated rate were offered. The multi-objective problem of the optimal investment project alternative choice was represented and solved.

Key words: investment, performance evaluation, decision-making, mathematical model, simulation modeling, statistical law.

T.R. Mkrtchyan

Development And Evaluation Of Educational Services Quality

Modern educational institutions throughout solve the problem of maintaining its competitive advantage in the educational market . Within this task , to ensuring an acceptable level of quality universities educational services given the utmost importance. In this regard , the article developed a classification of quality of the educational process , organized by the university. On the basis of the developed indicators can determine priority areas for increasing the efficiency of the institution and the level of satisfaction of educational services.

Keywords: educational service , quality, efficiency , satisfaction , educational process , consumers of educational services.

M. A. Chizhik, I. A. Sheveleva

Marketing research and evaluation of competitiveness of heat-proof clothing with voluminous insulation

The article presents results of marketing researches conducted with the aim of defining the level of competitiveness of clothes with feather-down filling produced by Russian manufacturers. A model of competitiveness of down clothes produced by different manufacturers was created. With the help of folding technique a model of competitiveness of feather-down clothing was created, which offers a possibility to evaluate each alternative variant according to several parameters simultaneously.

Key words: competitiveness, marketing research, clothing, voluminous filling, criterion, additive optimization, folding technique.

G. Yu.Chulanova

Some aspects categorization of customers

The article discusses the use categorise clients on the market of the enterprises. Considered are the signs, which can be classified clients on B2B market.
Key words client, full cost of client, the actual value, the potential value, freshness, frequency, and monetary value

Keywords: customer, the total price of the client, the actual value, potential value, freshness, frequency, monetary value

O.S. Melnikova

The task of logistic provider selection

In this paper we propose to consider the question of choosing a provider of transportation services , ie considered the head already made ​​a decision to removal of transportation functions outsourced. In most studies address the issue in question , neglected set of criteria according to which selects the provider of transport services ( transport method ) . Usually meet criteria such as shipping cost, time, quality of the operations , reliability, ensuring the safety of cargo , capacity and availability of the form required mode of transport. This list seems incomplete and insufficiently structured. As regards the proposed selection methods in the literature of transportation services provider , they can also be criticized .
Taking into account the above observations , in this article the author suggests using a special approach to finding the best solutions among the Pareto - optimal and analyzed for example choose the optimal solution , avoiding the above drawbacks in the article other proposed approaches . Work are briefly summarized in two stages:
At the first stage is allocated a set of local criteria by which to compare. And here in the first place should determine the supplier of transport services which level in question.
In the second stage verification of viable alternatives for compliance with their " sector admissibility ." Accordingly, those alternatives that lie outside their " sector admissibility " are excluded from further analysis.

Key words: logistics sector affordability, transportation of goods, outsourcing